Aging in Place Home Design: How to Plan a Home You Can Stay In

Topics:

architecturally designed prairie kitchen in Olympia

Quick answer: Aging-in-place design means planning a home so you can live in it safely and comfortably as mobility, balance, vision, and energy change over time. The core moves are a step-free entry, a main-floor primary suite, wider doors and hallways, a curbless shower with room to turn, and wall blocking for future grab bars. Building these in during design costs little. Retrofitting them later can mean tearing out floors, walls, and bathrooms.

Most people want to stay where they are. In AARP’s 2024 Home and Community Preferences Survey, 75 percent of adults 50 and older said they want to remain in their current homes as they age, and about half said they need a home that supports independent aging. The gap between those two numbers is a design problem, and it is one an architect can solve without making a home feel clinical.

Why plan for aging in place now

  • It is far cheaper during design. A curbless shower needs a recessed floor planned into the structure. Grab bar blocking costs very little while walls are open. Widening doors later means new headers, trim, and patching.
  • Life changes without warning. A knee surgery, a broken ankle, or a parent moving in can make stairs and tight bathrooms a problem overnight.
  • It helps everyone. Step-free entries work for strollers, luggage, and visiting friends who use walkers. Good lighting and lever handles make daily life easier at any age.
  • It protects your options. A home that adapts lets you choose when, or whether, to move.

The aging-in-place design checklist

Entry and circulation

  • At least one step-free entry, ideally from the garage or main approach
  • Doors 36 inches wide, which provides roughly 32 inches or more of clear opening
  • Hallways about 42 inches wide or more
  • Flush thresholds and minimal level changes inside
  • Lever door handles and easy-to-operate locks

Main-floor living

  • A primary bedroom and full bathroom on the entry level
  • Kitchen, laundry, and a comfortable living area on the same floor
  • A flexible room that can serve as an office now and a caregiver’s room later

Bathrooms

  • A curbless shower with a linear drain and a built-in or fold-down bench
  • A clear 5-foot turning circle in at least one bathroom
  • Solid blocking behind walls at toilets, showers, and tubs for future grab bars
  • Handheld shower on a slide bar, comfort-height toilet, and slip-resistant tile
  • A vanity that can open up for seated use if needed

Kitchen

  • Deep drawers in place of lower cabinets so nothing requires kneeling
  • At least one section of counter at a lower height for seated prep
  • Wall ovens and microwaves at reachable heights
  • An induction cooktop, which has no open flame and cools quickly
  • Strong task lighting under upper cabinets

Stairs and vertical circulation

  • Handrails on both sides of every stair, with good lighting at top and bottom
  • Consistent riser heights and contrasting nosings that are easy to see
  • Stacked closets on each floor sized to become a future elevator shaft

Lighting, controls, and finishes

  • Layered lighting with more light overall and less glare
  • Rocker switches mounted a bit lower and outlets mounted a bit higher than standard
  • Color and material contrast between floors, walls, and counters
  • Smart controls for lighting, thermostats, and door access

Outdoors

  • Level, well-lit paths with firm, slip-resistant surfaces
  • A covered entry and covered route from the car, which matters in Pacific Northwest rain
  • Raised garden beds and seating along the way

Universal design, not hospital design

Federal accessibility standards such as the ADA apply to public buildings, not private homes, so you get to decide how far to go. For most homes, universal design is the better approach: features that work for people of all ages and abilities, integrated so well that nobody notices them. A curbless shower reads as a clean, modern bathroom. A step-free entry reads as a generous porch. Wide halls feel gracious. The goal is a home that looks like a well-designed house, not a medical facility.

Adapting an existing home

If you love your current house, many aging-in-place features can be added through a remodel. Common projects include converting a main-floor room into a primary suite, adding a ground-level bedroom wing through a home extension, rebuilding a bathroom with a curbless shower, regrading or adding a ramp for a step-free entry, and reserving space for a future elevator.

Some families go a step further and add an accessory dwelling unit. A single-level ADU can house a parent close by, a caregiver, or the homeowners themselves while family moves into the main house. If you are weighing a major renovation against starting over, our guide to remodeling vs. rebuilding walks through that decision.

Designing for aging in place in the Pacific Northwest

  • Rain: Covered entries, covered parking connections, and slip-resistant exterior surfaces matter more here than in drier climates.
  • Slopes: Many Seattle and Bainbridge Island lots slope. A step-free route may require careful grading, a bridge entry from the high side, or placing the main living level at the driveway.
  • Daylight: Short winter days make generous, glare-free daylight and good artificial lighting even more important for mood and safety.
  • Comfort: Radiant floors and quiet heat pumps provide even, draft-free warmth that is easy on joints.

How an architect approaches aging-in-place design

We start with how you live now and how that may change. That conversation covers mobility, who might live with you in the future, how you entertain, and what you want to keep doing at home for decades. From there, we decide which features to build now, which to prepare for, such as blocking, elevator-ready closets, and wiring, and which to leave as options. For clients with specific needs, we can coordinate with occupational therapists or other specialists. Our interior design team carries the same thinking through fixtures, lighting, and finishes.

Frequently asked questions

What is aging-in-place home design?

It is the practice of designing or renovating a home so people can live in it safely and independently as they get older. It focuses on step-free access, main-floor living, accessible bathrooms and kitchens, good lighting, and room to adapt.

When should I start planning for aging in place?

The best time is whenever you are already designing a new home or a major remodel. Adding these features during design costs much less than retrofitting them later, and many are useful at any age.

Does aging-in-place design hurt resale value?

Well-integrated universal design features, such as curbless showers, main-floor suites, and step-free entries, tend to appeal to a broad range of buyers. Design quality matters more than the features themselves.

How wide should doorways be for a wheelchair?

Plan for at least 32 inches of clear opening. A 36-inch door typically provides that once the door thickness and hinges are accounted for.

Can I add an elevator to my house later?

Yes, if you plan for it. Stacking closets of the right size on each floor, with structure and power ready, makes a future residential elevator much simpler and less expensive to install.

Design a home you can stay in

Coates Design Architects designs custom homes and remodels across Seattle, Bainbridge Island, and the Puget Sound region with long-term livability built in. Contact our studio to talk about a home that works for you now and decades from now.